+86-15527482889
Leave Your Message
-
CONTACT SENGKUN
-
CONTACT SENGKUN -
CONTACT SENGKUN
Precision-engineered SiC refractory bricks designed for the unique thermal, chemical, and mechanical demands of modern glass manufacturing plants. Explore our featured product lines below.
Silicon Carbide (SiC) refractory bricks have become the material of choice across leading glass manufacturing plants worldwide. Here is why engineers and plant managers specify SiC for their most demanding applications.
SiC refractory bricks withstand continuous operating temperatures exceeding 1600°C, making them ideal for glass melting tanks, forehearths, and regenerator chambers where thermal stability is non-negotiable.
With thermal conductivity 5–10× higher than conventional alumina refractories, SiC bricks enable more uniform heat distribution across the glass melt, improving product consistency and reducing energy consumption significantly.
Glass melts are highly corrosive to ordinary refractories. SiC bricks resist attack from molten glass, alkali vapors, and silicate compounds, dramatically extending the campaign life of furnace linings by 40–80% compared to conventional materials.
SiC refractory bricks maintain excellent compressive strength at high temperatures, resisting deformation and spalling under the mechanical stresses of thermal cycling, glass flow, and structural loading in large-scale glass furnaces.
The high thermal conductivity and dimensional stability of SiC bricks reduce heat loss through furnace walls, lowering fuel consumption by up to 15%. This directly supports glass manufacturers' decarbonization and ESG goals.
SK Refractories' SiC bricks are manufactured with tight dimensional tolerances and custom shapes, ensuring tight joints, minimal refractory mortar consumption, and rapid installation to reduce plant downtime during cold repairs.
The global glass manufacturing industry consumes an estimated 1.2 million metric tons of refractory materials annually. SiC-based products now account for a growing share of this demand, driven by capacity expansions in flat glass, container glass, and specialty glass sectors.
The explosive growth of solar photovoltaic manufacturing has created a surge in demand for high-quality float glass furnaces. SiC refractory bricks are the preferred lining material for the melting and refining zones of these high-throughput furnaces, which operate 24/7 for campaigns of 8–12 years.
Increasingly stringent requirements for optical clarity and dimensional tolerance in automotive glass are pushing manufacturers to upgrade furnace linings. SiC bricks' ability to maintain dimensional stability under extreme heat directly improves glass flatness and optical quality.
With carbon taxes and emissions regulations tightening globally, glass manufacturers are actively replacing conventional fire clay linings with SiC refractories to achieve measurable reductions in fuel consumption and CO₂ emissions per ton of glass produced.
The semiconductor and display industries' insatiable demand for ultra-thin, high-purity specialty glass (OLED displays, borosilicate lab glass, pharmaceutical vials) requires furnace materials with near-zero contamination risk — a key advantage of high-purity SiC refractories.
Every zone of a glass melting plant presents unique thermal, chemical, and mechanical challenges. SiC refractory bricks from SK Refractories are engineered to address each specific application with precision.
The tank side walls are subject to continuous attack by molten glass at 1450–1550°C combined with alkali vapor corrosion from above. SiC bricks with silicon nitride bonding provide exceptional resistance to glass-line corrosion, the most critical wear zone in any glass furnace.
Regenerators thermally cycle from ambient to 1300°C+ with every reversal cycle. SiC regenerator bricks' low thermal expansion and high creep resistance prevent structural collapse and maintain airflow geometry across 10+ year campaigns, maximizing heat recovery efficiency.
The forehearth conditions the molten glass to precise forming temperatures. SiC linings ensure uniform temperature distribution with minimal heat loss, critical for producing defect-free container glass, tableware, and technical glass products.
The batch charging zone experiences intense thermal shock as cold batch materials contact the furnace. SiC bricks' excellent thermal shock resistance prevents premature spalling and cracking, reducing unplanned maintenance shutdowns in this high-wear area.
The throat — connecting the melting tank to the refiner — experiences extreme flow erosion from fast-moving molten glass at peak temperature. Dense, fine-grained SiC bricks are specified here for their superior erosion resistance and dimensional stability under load.
Burner port necks experience the highest flame temperatures in the entire furnace system. SiC silicon carbide bricks withstand direct flame impingement, high-velocity combustion gases, and corrosive alkali-sulfate vapors that would rapidly destroy conventional refractory materials.
SK Refractories' SiC bricks for glass manufacturing plants are available in multiple grades to match specific application requirements. Key technical parameters are shown below.
| Property | SiC-85 (Standard) | SiC-90 (High Grade) | Si₃N₄-SiC Bonded | Corundum-SiC |
|---|---|---|---|---|
| SiC Content (%) | ≥85 | ≥90 | ≥72 | ≥40 |
| Bulk Density (g/cm³) | 2.55–2.65 | 2.65–2.75 | 2.65–2.72 | 2.80–2.95 |
| Cold Crushing Strength (MPa) | ≥120 | ≥140 | ≥150 | ≥160 |
| Max Service Temperature (°C) | 1450 | 1550 | 1600 | 1700 |
| Thermal Conductivity (W/m·K @ 1000°C) | 12–15 | 15–18 | 14–17 | 10–13 |
| Apparent Porosity (%) | ≤18 | ≤14 | ≤16 | ≤12 |
| Primary Application in Glass Plant | Regenerators | Tank Side Walls | Port Necks, Burner Blocks | Forehearth, Feeder |
Zhengzhou SK Refractory Co., Ltd. (SK) is located in Xinmi, Zhengzhou, China. For over twenty years, SK Refractories has been dedicated to delivering high-performance, reliable solutions that redefine durability and efficiency for clients worldwide. Founded on the principles of innovation, quality, and sustainability, SK serves key sectors including steelmaking, cement production, non-ferrous metallurgy, glass manufacturing, and petrochemical processing.
SK Refractories' quality is embedded in every aspect of operations, from raw material sourcing to production and delivery. We partner with trusted suppliers to secure premium-grade raw materials, leveraging advanced manufacturing processes — such as automated pressing and controlled sintering — to ensure consistency and reliability. Our quality management system is certified to ISO 9001.
SK Refractories' main products include zircon bricks, corundum bricks, mullite bricks, sillimanite bricks, silica bricks, magnesia bricks, low porosity fireclay blocks, insulation bricks, and more. With 20,000+ tons annual production capacity and strict quality control processes, SK ensures the highest quality of refractory bricks for industrial furnaces.
Contact Us TodaySK Refractories is well known in domestic markets and internationally for the quality of refractory bricks. The refractory materials produced by SK Refractories have been exported to more than 35 countries including America, Spain, Germany, Italy, Brazil, Belgium, India, Japan, Korea, and more.
Our main products include Silica Brick, Low Porosity Fireclay Blocks, Sillimanite Brick, Corundum Brick, Zircon Brick, Mullite Brick, Insulating Bricks, refractory castables and refractory mortar. Each product batch undergoes rigorous multi-point quality testing — including XRF chemical analysis, bulk density verification, cold crushing strength testing, and thermal shock resistance evaluation — before shipment to glass manufacturing clients worldwide.
For glass plant customers specifically, we offer pre-installation technical consultation, custom shape manufacturing, and on-site technical support services to ensure maximum furnace performance and campaign longevity.
Learn More About Our Service
Our obligation is to supply high-quality refractory materials and service to achieve long lifetime of high-temperature furnaces. SK Refractories will always improve itself to provide better refractory products and service to customers worldwide.
Beyond SiC bricks, SK Refractories offers a comprehensive portfolio of high-performance refractory materials for every zone and application within your glass manufacturing facility.
We sincerely welcome both new and existing international customers to cooperate with us in a friendly manner and work together to create a bright future! Whether you need SiC refractory bricks for a new glass furnace construction, a cold repair project, or a full furnace relining, SK Refractories' engineering team is ready to provide customized solutions and competitive pricing.
Request a Quote Now